Yamaha PLG150-DX Owner's Manual page 65

Copying a voice from the Source box to the Destination box:
1) Click the desired voice in the Source box. (This is the voice you will be copying.)
2) Drag the highlighted voice to the Destination box, and drop it at the desired number.
(This is the location to which the voice will be copied. The previous voice at the
location is erased and replaced with the new one.)
3) Click "OK" to exit the Librarian.
4) Save the newly created set of Custom voices as a DX Cartridge File.
• Open Cartridge File
Click this to select and open an existing DX Cartridge File. (See
File.) The voices of the opened DX Cartridge File are shown in the Source box.
• Copy All
Clicking this button copies all the voices listed in the Source box to the Destination box.
(This is the same as
• This operation erases all previous voices in the Destination box and replaces them with the
Source voices.
• Init. All
Clicking this button initializes all the Destination voices to their default settings. (See
Initial Voice Default Settings.)
• This operation erases all previous voices in the Destination box and replaces them with iden-
tical initialized voices.
• OK
Click this to actually execute any of the Librarian operations and exit from the Librarian
box.
• Cancel
Click this to exit the Librarian box without executing any of the Librarian operations.
Open DX Cartridge File.)
65
Edit Menus /
DX Librarian
Open DX Cartridge