Yamaha PLG150-DX Owner's Manual page 4

DX Simulator Setup
Even after you've set the DX Part from the pop-up menu, you can change the set-
ting during an editing session from the DX Simulator Setup dialog box.
z Select "DX Simulator Setup."
While the DX Simulator is active and selected, click "Setup" on the menu bar, then
select "DX Simulator Setup." (Keyboard shortcut: [Alt], [U], [U], then [ENTER].)
• "DX Simulator Setup" can also be selected from the toolbar.
x Select the desired Part.
Do this from the Part No. combo box in the MIDI tab. Make other settings if neces-
sary. (See DX Simulator
c Click "OK."
Operations /
Setup.)
4
Assigning the PLG150-DX to a Part