Yamaha PLG150-DX Owner's Manual page 30

• [17] MODE/SYNC
These buttons are used to alternately select the
parameters.
• [18] FREQUENCY COARSE
This is used to select the
changes in the current operator's frequency.
• [19] FREQUENCY FINE
This is used to select the
changes in the current operator's frequency.
• [20] DETUNE
This is used to select the
• [21], [22] EG
These buttons are used to select the
• [21] RATE
This is used to select the
• [22] LEVEL
This is used to select the
• [23] - [25] KEYBOARD LEVEL SCALING
These buttons are used to select the
• [23] BREAK POINT
This is used to select the
• [24] CURVE
This is used to select the
• [25] DEPTH
This is used to select the
• [26] KEYBOARD RATE SCALING
This is used to select the
• [27], [28] OPERATOR
These buttons are used to select the
• [27] OUTPUT LEVEL
This is used to select the
Parameters /
Edit Panel Window / Play and Edit Modes
Oscillator Frequency Coarse
Oscillator Frequency Fine
Oscillator Detune parameter.
EG Rate 1 - 4
EG Rate 1 - 4 parameters.
EG Level 1 - 4 parameters.
Keyboard Level Scaling
Keyboard Level Scaling Break Point
Keyboard Level Scaling Curve
Keyboard Level Scaling Depth
Keyboard Rate Scaling
Operator parameters.
Operator Output Level
30
Oscillator Mode and
parameter, letting you make large
parameter, letting you make small
and EG Level 1 - 4 parameters.
parameters.
parameter.
parameters.
parameters.
parameter.
parameter.
Oscillator Sync