Yamaha PLG150-DX Owner's Manual page 28
Yamaha plg150-dx percussion-accessory: owners manual
Hide thumbs
Also See for PLG150-DX:
- Owner's manual (68 pages) ,
- Bedienungsanleitung (66 pages) ,
- Manual (7 pages)
Table of Contents
Advertisement
• [OPERATOR SELECT] button
This button is used to select the desired operator (1-6) for editing in the Edit mode. Each
successive click of the button steps through the available operators. (If an operator is off,
it will be unavailable.) The operator number is shown at the top right of the LCD for the
appropriate parameters.
Use this button when editing the following Edit parameters:
Amplitude Modulation Sensitivity
Oscillator
Envelope Generator (EG)
Keyboard Level Scaling
Keyboard Rate Scaling
Operator (Output Level
These parameters can all be edited independently for each of the operators.
• [EDIT/COMPARE] button
This button is used to select the
• [MEMORY SELECT 1-32/33-64] buttons
These buttons are used to select the two voice banks of the Custom voices: 1-32 or 33-
64. Clicking either of these buttons also activates the
• [FUNCTION] button
This button is used to select the
eters of the voice or instrument (printed in yellow below the appropriate voice buttons).
• LED display
The LED window indicates the number of the selected voice. It also indicates whether
the original or edited voice is active when using the
• LCD display
The LCD window displays the current status of the PLG150-DX. In the Play mode, it indi-
cates the selected voice bank, and the selected voice name and number. In the Edit and
Function modes, it shows the selected parameter, function, or operation, along with the
relevant value(s) or setting(s).
• Voice Select buttons
In the Play mode, these are used to select voices 1-32 (or 33-64) on the PLG150-DX. In
the Edit mode, the buttons are used to select the Edit parameters (printed in lavender
above the buttons). In the Function mode, they are used to select the Function parame-
ters (printed in yellow below the appropriate buttons).
The following descriptions explain each button's use in the Edit mode.
Parameters /
Edit Panel Window / Play and Edit Modes
Currently selected operator (Operator 6).
and
Velocity Sensitivity)
Edit mode
or the
Function
mode, which lets you edit certain global param-
28
Compare
function.
Play
mode.
Compare
function.
Advertisement
Table of Contents
