Utility - Yamaha MOTIF RACK ES Owner's Manual

QuntStrngth Quantize Strength
VelocityRt Velocity Rate
GateTimeRt Gate Time Rate
OutputSw Output Switch
TransmitCh Transmit Channel
Voice/Performance/Multi mode
Arpeggio Store
[SHIFT]+[MUTE/SEL/ENTER]
You can store up to five Arpeggio types to each Voice/Performance/Multi. You can select the desired Arpeggio form the Arpeggios stored in
each Voice/Performance/Multi with the PAGE [E][F] buttons while playing back. Also, you can delete the stored Arpeggios.
Storing Arpeggio Edit
lights)
Deleting Arpeggio Edit
[SHIFT]+[MUTE/SEL/ENTER]

Utility

Voice/Performance/Multi mode
In this mode, you can set parameters that apply to the entire system. This mode is actually a sub-mode of the Voice/Performance/Multi
mode. Press the [UTILITY] button in each mode to enter the Utility mode, and press the [EXIT] button after making settings to go back to the
previous mode.
General
Volume Volume
NoteShift
Note Shift
Tune Tune
PowerOnMode Power On Mode
The Strength value sets the "strength" by which note events are pulled toward the nearest quantize beats.
A setting of 100% produces exact timing set via the QuntValue parameter above. A setting of 0% results in
no quantization.
Settings: 0%~100%
Sets the velocity rate value. This determines how the original Velocities are increased or decreased during
Arpeggio playback. A setting of 100% means the original values are used. Settings below 100% will reduce
the velocity of the Arpeggio notes, whereas settings above 100% will increase the velocities.
Settings: 0% ~ 200%
n The Velocity cannot be decreased or increased beyond its normal range of 1 to 127; any values outside that range will
automatically be limited to the minimum or maximum.
Determines how much the Gate Time (length) of the Arpeggio notes is offset from the original value. This
determines how the original Gate Times are increased or decreased during Arpeggio playback. A setting of
100% means the original values are used. Settings below 100% will shorten the gate times of the Arpeggio
notes, whereas settings above 100% will lengthen them.
Settings: 0% ~ 200%
n The Gate Time cannot be decreased beyond its normal minimum of 1; any values outside that range will automatically
be limited to the minimum.
This enables or disables MIDI data output for the Arpeggio function. When this is set to "on," Arpeggio data
is sent via MIDI — allowing you to send the Arpeggio data to an external sequencer or play back the
Arpeggios on connected MIDI tone generators. This parameter is only available in the Performance or Multi
mode.
In the Voice mode, you can set this in the "ArpOutSw" parameter (in the [UTILITY]
(page 90).
Settings: off, on
Determines the MIDI transmit channel for Arpeggio playback data. This parameter is only available in the
Performance or Multi mode. In the Voice mode, you can set this in the "ArpOutSw" parameter (in the
[UTILITY] Voice display) (page 90).
Settings: 1-16, System TCh
n When selecting "System TCH," the Arpeggio data will be transmitted via the channel which is set in the "TransmitCh"
parameter from the Utility.
[SHIFT]+[ARP EDIT]
select desired "Type" [SHIFT]+[MUTE/SEL/ENTER]
[SHIFT]+[MUTE/SEL/ENTER]
[SHIFT]+[MUTE/SEL/ENTER]
[UTILITY] select each display with PAGE [E][F]
Determines the overall volume of the instrument.
Settings: 0 ~ 127
Determines the amount (in semitones) by which the pitch of all notes is shifted.
Settings: -24 ~ 0 ~ +24
Determines the tuning of the MOTIF-RACK ES's overall sound. Adjust the tuning (in 0.1 cent steps).
Settings: -102.4 ~ +102.3
This determines the default power-on mode (and memory bank) – letting you select which condition is
automatically called up when you turn the power on.
Settings: multi, voice (USR1), voice (PRE1), GM, Performance
multi ................. When turning the power on next time, the Multi Play mode is entered and the first program number (001) is
selected automatically.
voice (USR1) ... When turning the power on next time, the Voice Play mode is entered and the first program number of the User
Voices (USR1: 001) is selected automatically.
voice (PRE1).... When turning the power on next time, the Voice Play mode is entered and the first program number of the
Preset Voices (PRE1: 001) is selected automatically.
GM................... When turning the power on next time, the Voice Play mode is entered and the first program number of the GM
Voices (GM: 001) is selected automatically.
performance.... When turning the power on next time, the Performance Play mode is entered and the first program number
(USR: 001) is selected automatically.
select Arpeggio type (Category, Type)
select desired number with data dial
select desired number with data dial
Voice display)
[ARPEGGIO] (LED
[ARPEGGIO] (LED turns off)
Owner's Manual
Utility
89