Voice Edit (For Plug-In Voice) - Yamaha MOTIF RACK ES Owner's Manual

Voice Edit (for Plug-in Voice)

These parameters are basically the same as in Normal Voice Edit. Unlike with Normal Voices, the Plug-in Voices only have one Element for
editing.
n Depending on the particular Plug-in Board you are using, some of the parameters described here may not be available.
n For details on the current lineup of available Plug-in Boards, see page 52.
Common Edit [VOICE]
General
Output
EG/FLT (Envelope Generator/Filter)
CtrlSet (Controller Set)
Set1/2Source Controller Set Source
Set1/2Dest Controller Set Destination
Set1/2Depth Controller Set Depth
MW Filter Modulation Wheel Filter
MW PMod MW Wheel Pitch Modulation
Depth
MW FMod Modulation Wheel Filter
Modulation Depth
MW AMod Modulation Wheel Amplitude
Modulation Depth
AT Pitch Aftertouch Pitch
AT Filter Aftertouch Filter
AT PMod Aftertouch Pitch Modulation
Depth
AT FMod Aftertouch Filter Modulation
Depth
AT AMod Aftertouch Amplitude
Modulation Depth
AC Source
Assignable Control Source
AC Filter Assignable Control Filter
AC PMod Assignable Control Pitch
Modulation Depth
AC FMod Assignable Control Filter
Modulation Depth
AC AMod Assignable Control
Amplitude Modulation Depth
select Plug-in Voice [Edit]
Same as the General display in Normal Voice Common Edit. See page 65. The following parameters are not
available for Plug-in Voice:
• Portamento Mode, Time Mode, and Legato Slope settings
• Micro Tuning settings
Unlike with Normal Voice Edit, the Upper and Lower ranges cannot be independently set here.
Same as the Output display in Normal Voice Common Edit. See page 66.
Same as the EG/FLT display in Normal Voice Common Edit. See page 66.
The following parameters are only available for Plug-in Voice: AEG Attack, AEG Decay, AEG Release, Cutoff,
Resonance
Same as the CtrlSet display in Normal Voice Common Edit. See page 66. Please note that the Element
Switch parameter is not available in the Plug-in Voice Common Edit mode.
Same as the CtrlSet display in Normal Voice Common Edit. See page 66. Please note that the Element
Switch parameter is not available in the Plug-in Voice Common Edit mode.
Determines the depth of control of the Modulation Wheel over the filter cutoff frequency.
Settings: -64 ~ 0 ~ +63
Determines the depth of control the Modulation Wheel has over pitch modulation. The higher the setting, the
greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control the Modulation Wheel has over filter cutoff modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control the Modulation Wheel has over amplitude modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control of keyboard aftertouch over pitch. You can set a value (in semitones) of up
to two octaves.
Settings: -24 ~ 0 ~ +24
Determines the depth of control of keyboard aftertouch over the Filter Cutoff Frequency.
Settings: -64 ~ 0 ~ +63
Determines the depth of control that keyboard aftertouch has over pitch modulation. The higher the setting,
the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control that keyboard aftertouch has over the filter cutoff modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control that keyboard aftertouch has over the amplitude modulation. The larger the
setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the MIDI Control Number used to control the filter, PMod, FMod, and AMod.
Settings: 0 ~ 95
Determines the depth of the filter cutoff frequency controlled by the Control Change set in the "AC Source"
parameter above.
Settings: -64 ~ 0 ~ +63
Determines the depth of control the Control Change messages (selected in the "AC Source" parameter)
have over the pitch modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control the Control Change messages (selected in the "AC Source" parameter)
have over the filter cutoff modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127
Determines the depth of control the Control Change messages (selected in the "AC Source" parameter)
have over amplitude modulation. The larger the setting, the greater the depth of control.
Settings: 0 ~ 127
[SHIFT]+[COMMON] select each display with PAGE [E][F]
Voice mode Voice Edit (for Plug-in Voice)
Owner's Manual
75