Power Cable Installation; Auxiliary Connections - Xylem GOULDS hydrovar X Instruction Manual

3. Cover screws
4. Phase conductors
5. Cable gland
6. Power supply cord
7. Protection conductor (ground)
8. Cover
9. Additional ground connection

4.4.3 Power cable installation

1. Remove the cover and observe the wiring diagrams inside.
2. Insert the power cable in the cable gland.
3. Tightly connect the conductors, making sure that the protection one is longer than the
phase ones.
For size D only, tighten the terminal screws with a Pozidriv screwdriver.
Tightening torque: 4 Nm (35 lbf·in)
4. Tighten the cable gland.
5. Fit the cover and tighten the screws.
Tightening torque: 3 Nm (27 lbf·in) ± 15%

4.4.4 Auxiliary connections

Figure 7: Auxiliary connections
®
hydrovar X Smart Pump Range INSTRUCTION MANUAL
4 Installation
23