Register Your Brewzilla To Your Account On The Rapt Cloud; Remote Operation Via The Rapt Portal - KegLand BrewZilla 100L - Gen 4 Instruction Manual

Table of Contents

Advertisement

100L BrewZilla Gen 4 Instruction Manual

3. Register your BrewZilla to your Account on the RAPT Cloud

1. Once your BrewZilla controller is connected to your Wi-Fi network enter the settings
by pressing Select on the controller and select Register Device. A Mac Address and
Validation Code will then be displayed on the device. Write both of these down. You
will need to enter the MAC address and Validation Code later on the RAPT Cloud to
register your device.
2. Log in to the RAPT Portal (https://app.rapt.io/) on a device that is connected to the
same Wi-Fi network as the BrewZilla controller you are registering.
3. In the RAPT Portal select Add New Device. Select BrewZilla from the drop down.
Select Next after ensuring that your BrewZilla Controller is connected to your Wi-Fi
network as above.
4. Enter the MAC address and Validation Code when prompted in the required fields,
then select Next.
5. Congratulations! Your BrewZilla controller is connected to Wi-Fi and registered to
your RAPT Portal and your BrewZilla can now be controlled through the RAPT Portal.

Remote Operation via the RAPT Portal

The brewery can be controlled via a profile generated in the RAPT Portal. Once you have
registered your device on the RAPT Portal select Profiles and Create New Profile. Then add
your profile steps such as strike, mash, mash-out, sparge, boil etc. Once you have made your
profile then either select Send Profile to Device from the profile menu or Start Profile
Session on the Dashboard to send the profile to your BrewZilla controller. Once the profile
has been sent to the device it will automatically energise the device and begin the profile.
You will still need to turn the pump on/off on the controller and adjust the heating power
and pump output percentage (if required) manually on the controller.
For instructions to control the brewery manually via the temperature controller including
adjusting the set temperature, adjust heating power and pump output percentage then
refer to
Operation of the BrewZilla via the Temperature
9
48
Page
of
www.KegLand.com.au
Controller.
Last Updated 09/02/2024 12:20 PM

Advertisement

Table of Contents
loading

Table of Contents