Advertisement
Quick Links
FermZilla Tri-Conical 27L and 55L Instruction Manual
FermZilla Tri-Conical
27L and 55L Gen3
Instruction Manual
This instruction sheet contains vital information that is related to the safe usage and handling of the
FermZilla Uni Tank from Generation 3 to 4. It is vital that you read this instruction sheet from front to
back before using the product! THIS IS FOR YOUR OWN SAFETY
Ferment, Clarify, Dispense. The uni tank that does it all with ease.
www.KegLand.com.au
Last Updated 9/06/2023 8:44 AM
Page 1 of 13
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for KegLand FermZilla Tri-Conical 27L Gen3
Summary of Contents for KegLand FermZilla Tri-Conical 27L Gen3
- Page 1 FermZilla Uni Tank from Generation 3 to 4. It is vital that you read this instruction sheet from front to back before using the product! THIS IS FOR YOUR OWN SAFETY Ferment, Clarify, Dispense. The uni tank that does it all with ease. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 1 of 13...
- Page 2 11. If you use the fermenter under pressure hydro test the fermenter every 24 months to ensure it is safe to use. 12. Only use chemical cleaners and sanitizers that are approved by Kegland. These include: a) Super Kill Ethyl Sanitiser Spray (effective for sanitising the exterior of the FermZilla) (KL05371) b) StellarSan (mixed to the correct specification) (KL05357) c) StellarClean (not to be left in the FermZilla for more than 30 minutes) (KL05494) …...
- Page 3 2 x 3 Inch tri-clover 3 Piece Clamp 3 Inch tri-clover Beaded Seal 600mL Collection Container with 2 x Blank PCO1881 Black Caps and 3 Inch Tri-Clover Cap Spare Lid O-ring Spare Collection Container O-ring www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 3 of 13...
- Page 4 5. Ensure the Red PRV is placed into the pressure relief valve. 6. Push the three-piece air-lock into the silicone bung then push both parts into the remaining hole in the lid. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 4 of 13...
- Page 5 Place the 3” tri-clover seal and butterfly valve onto the 3” tri-clover ferrule on the tank. Fasten the butterfly valve in place onto the vessel using the 3” tri-clover 3-Piece clamp, ensuring that the seal is seated in the groove on the butterfly valve and tank. seal. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 5 of 13...
- Page 6 3. Install a 3” tri-clover onto 3” tri-clover collection container (600mL) and secure to the butterfly valve using a 3” triclover clamp, ensuring that the seal is seated in the groove on the collection container lid and butterfly valve. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 6 of 13...
- Page 7 Once the system is depressurised the butterfly valve can then be closed if there is liquid in the FermZilla. Then the lid and collection container can be detached from the butterfly valve by loosening the tri-clover clamp which holds the 2” tri-clover lid in place. www.KegLand.com.au Last Updated 2/03/2022 3:06 PM Page 7 of 13...
- Page 8 4. Disconnect the ball lock disconnect and purge the pressure in the collection container by slightly loosening the carbonation cap. Then retighten the carbonation cap and repeat step three at least 3 more times to purge as much oxygen as possible. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 8 of 13...
- Page 9 Submerge this PRV in StellarClean solution to remove any sticky residue. Once all the residue has been removed, sanitise the PRV with StellarSan or ethyl kill solution and screw back in to the pressure lid. www.KegLand.com.au Last Updated 2/03/2022 3:06 PM Page 9 of 13...
- Page 10 FermZilla Tri-Conical 27L and 55L Instruction Manual www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 10 of 13...
- Page 11 Belgian ales benefit from non-pressure fermentation to produce the ester and phenolic flavours classic to these www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 11 of 13...
- Page 12 Later in the pressure transfer you can increase the pressure difference between the keg and FermZilla by opening the spunding valve further to release more pressure. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 12 of 13...
- Page 13 The hops will float up through the beer and introduce a fantastic hop aroma. Note: If you have a CO2 cylinder you can also purge the oxygen out of the hops before connecting to the butterfly valve. www.KegLand.com.au Last Updated 9/06/2023 8:44 AM Page 13 of 13...
Need help?
Do you have a question about the FermZilla Tri-Conical 27L Gen3 and is the answer not in the manual?
Questions and answers