Advertisement
Pinout Diagram for Tally Light
Tally Light Pinout:
GND: Connects to the ground of the device or system.
R: Connects the red tally light
G: Connects the green tally light
Y: Connects the yellow tally light
NC: Stands for"Not Connected"Disregard these pins.
Learn More
More dynamic information at official website :www.ikancorp.com
Support
Contact email: support@ikancorp.com
©2024 Ikan International.All rights reserved.
www.ikancorp.com|1.713.272.8822|sales@ikancorp.com
Advertisement
