Advertisement
Teleprompter Assembly Setup
Step 1
Place the teleprompter glass frame on a flat surface and remove the four
screws as shown.
Step 3
The metal frame is directional. Make sure the thicker side is on top and
the slimmer side is on the bottom.
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Step 2
Align and attach the teleprompter hood with the 8 screw pegs from the
teleprompter frame.
Step 4
Put the washers on before tightening the screws. The washers and 4
additional screws are inside a bag on the bottom foam.
Advertisement
