Ikan PT4500S-TMW-TK Quick Start Manual page 4

High bright 15" sdi tally teleprompter w/ 15" widescreen sdi talent monitor & travel cases

Step 7

Attach the monitor mounts on the back of the monitor's VESA compatible threads using the 4 included screws and provided 2mm hex key.

Step 8

After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket.

Make sure the 15mm rods go through both set of monitor mounts. Please ensure that all screws are properly tightened after inserting the monitor.

*SAFETY NOTE*

Make sure to leave at least 2 inches of the rods inside the teleprompter base.

Teleprompter Base

www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com

Table of Contents