Advertisement
Quick Links
PT4500S-TMW-TK
High Bright 15" SDI Tally Teleprompter w/ 15" Widescreen SDI Talent Monitor & Travel Cases
What's Included
1x
Teleprompter Base
1x
Hood Frame
1x
Silicone Hood w/ Canvas Shroud
1x
Counterweight
1x
Tall Riser
1x
Medium Riser
1x
DSLR Riser
2x
L-Shaped Hex Keys
2x
1/4-20 Camera Screws
1x
15 in. SDI 4:3 Monitor
1x
15 in. SDI 16:9 Widescreen Monitor
1x
Power Adapter
1x
70/30 15 in. Glass
1x
Digital Copy of Prompter Pro4
1x
Hard Travel Case
1x
Hard Travel Case for Talent Monitor
www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com
Quick Start Guide
Advertisement
Related Manuals for Ikan PT4500S-TMW-TK
Summary of Contents for Ikan PT4500S-TMW-TK
- Page 1 Quick Start Guide PT4500S-TMW-TK High Bright 15" SDI Tally Teleprompter w/ 15" Widescreen SDI Talent Monitor & Travel Cases What’s Included Teleprompter Base Hood Frame Silicone Hood w/ Canvas Shroud Counterweight Tall Riser Medium Riser DSLR Riser L-Shaped Hex Keys 1/4-20 Camera Screws 15 in.
- Page 2 Teleprompter Assembly Setup Step 1 Step 2 Place the teleprompter glass frame on a flat surface and remove the four Align and attach the teleprompter hood with the 8 screw pegs from the screws as shown. teleprompter frame. Step 3 Step 4 The metal frame is directional.
- Page 3 Step 5 Extendthe teleprompter hood open and attach teleprompter boot using the clips. It is suggested to align the seam with the bottom of the teleprompter hood. Step 6 Removethe monitor mounts from the teleprompter base using the included larger 4mm hex key to loosen from the 15mm rods. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com...
- Page 4 Step 7 Attach the monitor mounts on the back of the monitor’s VESA compatible threads using the 4 included screws and provided 2mm hex key. Step 8 After the monitor mounts are attached, adjust the 15mm rods to accommodate the monitor. Leave about 1 inch of room for the teleprompter bracket. Make sure the 15mm rods go through both set of monitor mounts.
- Page 5 Step 9 Step 10 While sliding the teleprompter bracket into the slot of the teleprompter Once the bracket is in place, tighten the side screw to lock in place. Double base pull on the red knob to allow the bracket to fully slide in. check and make sure all the screws are tightened with the included hex keys.
-
Page 6: Monitor Ports
Monitor Ports Monitor Menu Settings Video Config Contrast (White Level) Brightness (Black Level) Tint (Chroma Hue) Chroma (Chroma Saturation) Sharpness (Detail) RGBSetup – Manually configure RGB Return System Config Menu Duration – Set duration of how long menu stays on screen Video Ratio –... -
Page 7: Optional Accessories
Watch our VIDEO TUTORIAL on how to assemble Ikan Professional Teleprompters ikancorp.com/15-in-videos/ Specifications 15 in. Teleprompter 15 in. Teleprompter Monitor 15 in. Widescreen Talent Monitor Medium: 3.74 in.| High: 5.31 in./ | DSLR: 6.29 Riser Plate Height Aspect Ratio Aspect Ratio 16:9 in./160mm... -
Page 8: Learn More
• Damage caused by abuse or misuse, dismantling, or changes to the product not made by the company. • Damage caused by natural disaster, abnormal voltage, and environmental factors, etc. ©2024 Ikan International.All rights reserved. www.ikancorp.com | 1.713.272.8822 | sales@ikancorp.com... - Page 9 R: Connects the red tally light G: Connects the green tally light Y: Connects the yellow tally light NC: Stands for"Not Connected"Disregard these pins. Learn More More dynamic information at official website :www.ikancorp.com Support Contact email: support@ikancorp.com ©2024 Ikan International.All rights reserved. www.ikancorp.com|1.713.272.8822|sales@ikancorp.com...