Drawings and technical data................Replacement for the chapter 'In the radiant area of the fireplace insert' from 'General construction infor- mation" of the Brunner products ment for the stove fitters': In the radiation area of the Urfeuer fireplace Parts made of flammable building materials or with...
The present fireplace is a special design made to customer specifications. This fireplace is not type approved; There is no declaration of performance for this device! As producer, BRUNNER provides manufacturer’s data to insure fire security and the right dimen- sions of the chimney system. With this information, the responsible regional chimney sweepers are able to approve and permit the installation of an Urfeuer.
Page 39
… with firetable frame narrow … with firetable frame wide We suggest for CAD planning Palette CAD. Permanent updated drawings: www.brunner.de Frames/ flue gas outlet connection/ combustion air supply connection/ front variants/ support bearing are marked in col- Stand: 2023-03-14...
Page 40
Planning and installation - Urfeuer® 4free 53.5 Data for functional demonstration Flue gas mass flow Outlet temperature °C Necessary supply pressure Total fuel load 2 - 5 Combustion air consumption Combustion air connection Ø Cross-section of gratings Convection air Supply air Min.