Drawings and technical data.................. 22 Replacement for the chapter 'In the radiant area of the fireplace insert' from 'General construction infor- mation“ of the Brunner products ment for the stove fitters': In the radiation area of the Urfeuer fireplace Parts made of flammable building materials or with...
- which can only be used as an open fireplace As producer, BRUNNER provides manufacturer’s data to insure fire security and the right dimensions of the chimney system. With this information, the responsible regional chimney sweepers are able to approve and permit the installation of an Urfeuer.
Page 23
… with mounting frame L2 … with mounting frame L4 / R3 We suggest for CAD planning Palette CAD. Permanent updated drawings: www.brunner.de Frames/ flue gas outlet connection/ combustion air supply connection/ front variants/ support bearing are marked in col-...
Page 24
Planning and installation - Urfeuer® 50/66 Data for functional demonstration Flue gas mass flow Flue gas temeperature °C Necessary supply pressure Total fuel load 2 - 4 Combustion air consumption Combustion air connection Ø Cross-section of gratings exhaust warm air Recirculation air Minimal distances of the fireplace to cladding, insulation layer...