Table of Contents
Advertisement
Troubleshooting
FIXING BLINKING OR RED LIGHT ISSUES
This section is only applicable if the light on the booster is red, blinking red or green
/red lights.
1 Verify the inside antenna is at least 24 inches from the booster and pointed away
from the booster. Unplug and re-plug in power supply.
2 Tighten all cable connections (be sure to finger tighten only, do NOT use tools).
You may want to undo and redo the connection completely. Unplug and re-plug in
power supply.
3 Increase the distance (horizontally or vertically) between the outside and inside
antenna. Add included cable if needed. Un-plug and re-plug in power supply.
If you are having any difficulties while testing or installing your booster, contact our
weBoost Customer Support team for assistance (1-866-294-1660).
13
Advertisement
Table of Contents
