Yamaha DTXTREME Owner's Manual page 51

You can adjust the sensitivity of the hi-hat controller connected to the H.HAT CONTROL
jack.
[FootCtrl1] Sens in Drum Kit Trigger Edit mode (page 38)
You can set the depth at which the hi-hat controller outputs a closed hi-hat signal and the
detection time for the foot splash.
[UT7] FCoffset, FCspt in Utility mode (page 74)
You can set the hi-hat controller (foot controller) connected to the H.HAT CONTROL jack
to act as a MIDI controller.
[FootCtrl1] Func, [FootCtrl2] MIDI, Type in Drum Kit Trigger Edit mode (page 38)
You can set the footswitch connected to the FOOT SW jack to act as one of the following:
To use it as a hi-hat controller
[FootSW1] Func, Velocity in Drum Kit Trigger Edit mode (page 39)
To use it as a kick pedal
[FootSW1] Func, Velocity in Drum Kit Trigger Edit mode (page 39)
To use it to select a drum kit, to start/stop a song, or so on.
[FootSW1] Func in Drum Kit Trigger Edit mode (page 39)
To use it as a MIDI controller
[FootSW1] Func, MIDI, Type, [FootSW2] OnValue, OffValue in Drum Kit Trigger Edit
mode (page 39)
You can set the DTXTREME to temporarily ignore trigger signals from the connected pads
and controllers.
[UT6] TrgByps in Utility mode (page 73)
The above features can also be switched on/off via the pads.
[TrgFunc] Func in Drum Kit Trigger Edit mode (page 29)
Drum Voice Settings
When using the Special Snare voice, you can choose shell and mute settings, adjust the
tension using the snappy settings and so on, just as with a real acoustic drum.
[Voice2] Special Snare settings page in Drum Kit Voice Edit mode (page 45)
You can set the key mode and alternate group voices that sound simultaneously.
[Voice5] KeyMode, AltGrp in Drum Kit Voice Edit mode (page 47)
You can select whether or not to ignore Note On/Off messages for each MIDI Note
Number.
[Voice5] RvKeyOn, RvKeyOff in Drum Kit Voice Edit mode (page 48)
You can set the total volume level for the whole drum kit.
[COMMON1] Volume in Drum Kit Trigger Edit mode (page 40)
You can specify chords to play back using the pads.
[Chord] in Drum Kit Trigger Edit mode (page 33)
You can set the crossfade, which controls the change in volume when multiple voices are
played back simultaneously.
[TrgMIDI3] VelXFade in Drum Kit Trigger Edit mode (page 34)
51