10. Adjust the tone using the filter
1 Filter (Cutoff frequency)
2 Q (Quantity)
By raising the cutoff frequency, the tone of the drum voice becomes brighter. By adjusting
the Q (Quantity) parameter, the frequencies around the cutoff frequency are boosted.
11. Use Page
and
12. Adjust the attack (the time for the volume to rise from zero) and the decay (the
time for the volume to fade to zero)
1 Attack
2 Decay
By adjusting the attack value, you can make the voice sound crisper or softer. By adjusting
the decay value, you can lengthen or shorten the time for the sound to fade to zero.
13. Use Page
and
buttons to go to the [Voice4] page
1
buttons to go to the [Voice6] page
1
2
2
43