Yamaha DTXTREME Owner's Manual page 48

4. Enter Recording Standby state
5. Select the recording mode
Replace: Your performance overwrites any existing data.
n If the track to which you want to record already contains some data, you will not be able to record unless
you select another (empty) track or clear your selected track in Song Job mode.
OverDub: Your performance is added to any existing data. Recording coutinues repeatedly
n You can use the Step entry method that lets you record data in the specified divisions (note steps). For
details of Step Recording, see page 21, Reference Section.
6. Select the track to record on
7. Set the length of the recording (number of measures)
CLICK
TAP GROOVE CHECK
between specified measures until you stop it. This mode is useful if you want to
record a complicated rhythm dividedly.
48