Table of Contents
Advertisement
User Manual
CFV 100C
Service
Main Menu > General > Service
Firmware Update
Check the firmware version of the camera
and lens.
Follow the instructions below to update the
firmware on this page when new firmware is
released.
1. Visit the official Hasselblad website www.
hasselblad.com to download the latest
firmware.
2. Store the firmware in the root directory
of the camera SSD or CFexpress memory
card.
• If using the camera SSD, make sure to tap
Mass Storage in the dialogue on the touch
display after the camera is connected to
the computer, and then store the firmware
to the camera.
• If using a memory card, make sure the
memory card is inserted properly into the
camera.
3. Power on the camera, go to Main Menu
> General > Service and tap Check for
Update.
4. Select the firmware file. Make sure that
the name and version number of the
firmware selected are the same as the
downloaded version.
5. Tap Update, and the update dialogue
appears. Tap Update in the dialogue to
start the firmware update.
Firmware Update
CFV Firmware
907X Firmware
Lens Firmware
Check for Update
Default Settings
Reset all Settings
File Counter
Reset
Log Data
Save to Card
Delete from Camera
Sensor Calibration
Calibrate
Calibrate to get the best output from your sensor. XCD lens is
required.
6. Th e c a m e ra w i l l u p d at e f i r m w a re
automatically. It will take several minutes
for the update to complete. DO NOT
power off the camera or remove the
memory card if in use during an update.
7. The camera will show information for a
successful update after completed.
8. In the Service screen, check and confirm
that the firmware is the latest version.
CONTENTS
Service
v3.1.0
v1.3.3
v1.4.1
123
Advertisement
Table of Contents
