Table of Contents
Advertisement
User Manual
CFV 100C
Default Settings
Reset all Settings: Reset all the settings except custom profiles to the default settings. If
the box for Reset Profiles in the pop-up menu is checked, all the settings including custom
profiles will be reset to the default settings.
File Counter
Tap Reset and press the corresponding button under the touch display. The next captured
images will be numbered B0000001.
• After resetting the file counter, if there are images present on the currently used storage,
a new folder will be created in the storage in use and set as the default storage folder
to avoid images using the same number. The pop-up window after reset will display the
name of the new folder. All the images captured after this will be stored in the new folder.
• When the secondary storage is set for backup in the Storage settings, a new folder, if
required during reset, will be created in both the built-in SSD and memory card.
Log Data
The log data is the internal data of the camera for repair that can be used by Hasselblad
technical support. Users can save or delete the log data using the buttons on the touch
display.
Save to Card: Tap to save the current log data to the memory card or camera SSD if a
memory card is not used. DO NOT remove the memory card or power off the camera when
saving the log.
Delete from Camera: Tap to delete the saved log data from the camera.
Sensor Calibration
Calibrate to get the optimal output from the sensor when using the 907X camera body and
XCD lens.
Make sure that the battery level is more than 80%. Tap Calibrate, follow the onscreen
instructions, and wait for the calibration to be completed.
CONTENTS
124
Advertisement
Table of Contents
