Firmware Update - Hasselblad X2D 100C User Manual

User Manual
X2D 100C
Service
Main Menu > General > Service

Firmware Update

Check the firmware version of the camera
and lens.
Follow the instructions below to update the
firmware on this page when new firmware is
released.
1. Visit the official Hasselblad website www.
hasselblad.com to download the latest
firmware.
2. Store the firmware in the camera SSD or
CFexpress memory card.
3. Make sure the memory card is inserted
into the camera correctly if using a
memory card for an update.
4. Power on the camera, go to Main Menu
> General > Service and tap Check for
Update.
5. Select the firmware file. Make sure that
the name and version number of the
firmware selected are the same as the
downloaded version.
6. Tap Update, and the update dialogue
appears. Tap Update in the dialogue to
start the firmware update.
7. Th e c a m e ra w i l l u p d at e f i r m w a re
automatically. It will take several minutes
for the update to complete. DO NOT
power off the camera or remove the
memory card if in use during an update.
8. The camera will show information for a
successful update after completed.
9. In the Service screen, check and confirm
that the firmware is the latest version.
Service
Firmware Update
Camera Firmware
Lens Firmware
Check for Update
Default Settings
Reset all Settings
Reset all Settings including Profiles
File Counter
Reset
Log Data
Save to Card
Delete from Camera
CONTENTS
v1.0.0
v1.0.0
103