Eg Declaration Of Conformity - deconta G 600 Instruction Manual

15

EG Declaration of Conformity

The manufacturer / distributor
deconta GmbH
Im Geer 20
46419 Isselburg
hereby declares that the following product
Product name:
Type designation:
Serial number:
Trade name:Negative pressure unit
Year of manufacture:
Description:
complies with all relevant provisions of the applied legal regulations (hereinafter) - including their amendments in force at
the time of the declaration. The sole responsibility for issuing this declaration of conformity lies with the manufacturer.
This declaration relates only to the machine in the condition in which it was placed on the market; parts and/or
interventions subsequently fitted by the end user are not taken into account.
The following legislation was applied:
Machinery Directive 2006/42/EC
EMC Directive 2014/30/EU
Radio Equipment Directive 2014/53/EU
RoHS Directive 2011/65/EU
The protection goals of the following additional legal regulations were met:
Low Voltage Directive 2014/35/EU
The following harmonised standards were applied:
EN 60204-1:2018
EN 61000-6-2:2005
EN 62368-1:2014/AC:2015
EN ISO 12100:2010
EN ISO 13849-1:2015
EN ISO 13849-2:2012
EN ISO 13857:2019
Name and address of the person authorised to compile the technical file:
Boland, Thomas - deconta GmbH - Im Geer 20 - 46419 Isselburg
Place: Isselburg
Negative pressure unit green dec G 600, G 700
Original operating instructions
green dec
G 600, G 700
see type plate
green dec
see type plate
Negative pressure unit green dec
Safety of machinery - Electrical equipment of machines - Part 1: General
requirements (IEC 60204-1:2016 (Modified))
Electromagnetic compatibility (EMC) - Part 6-2: Generic standards - Immunity for
industrial environments (IEC 61000-6-2:2005)
Equipment for audio/video, information and communication technology - Part 1:
Safety requirements (IEC 62368-1:2014 (Modified))
Safety of machinery - General principles for design - Risk assessment and risk
reduction (ISO 12100:2010)
Safety of machinery - Safety-related parts of control systems - Part 1: General
principles for design (ISO 13849-1:2015)
Safety of machinery - Safety-related parts of control systems - Part 2: Validation (ISO
13849-2:2012)
Safety of machinery - Safety distances to prevent hazard zones being reached by the
upper and lower limbs (ISO 13857:2019)
Date: 21.03.2023
EG Declaration of Conformity
62 from 62
Version 1