6.2.5
Means of transport
For safe off-site transport, a means of transport is required that meets the following
requirements:
•
The load capacity must be dimensioned in such a way that the mass of the machine
can be safely accommodated.
•
The size of the transport surface must be such that the machine can be safely placed
on the transport surface without falling off.
6.3
Internal transport
6.3.1
Transport space
In the case of in-plant transport, the machine is transported on the company premises from
one installation site to another installation site.
6.3.2
Legislation
The internal transport of the machine is carried out in accordance with the legislation of the
country in which the machine is transported outside the company.
6.3.3
Warning of residual risks
Negative pressure unit green dec G 600, G 700
Original operating instructions
Falling of the machine possible due to unintentional change of position
when loading and unloading onto / from a means of transport.
Wear safety shoes. Loads can fall or be set down inaccurately. Serious
injuries to the feet and toes are possible.
Use head protection. Suspended loads can swing. Inattention can cause
the head to bump.
Use gloves. For transport, the unit must be attached to hoists or
transported by a forklift truck. Hands can be crushed or scraped during
these operations.
Crushing hazard: Wear safety shoes to protect against running over
limbs.
Transport
25 from 62
Version 1