Troubleshooting And Fault Clearance; Possible Malfunctions And Tips For Rectifying Malfunctions - deconta G 600 Instruction Manual

9.6

Troubleshooting and fault clearance

This section contains information on safe troubleshooting of the machine.
9.6.1

Possible malfunctions and tips for rectifying malfunctions

The following table gives an overview of malfunctions and measures to remedy them.
Malfunction
Negative
pressure too low
Unit does not
work
Unit does not
work
Negative pressure unit green dec G 600, G 700
Original operating instructions
Possible cause
Pre- / pocket or main filter
dirty
Power source not in order
Components on the vacuum
holding device defective
Measure
Change filter as described under 9.5
described
Have the power source inspected
and repaired by a qualified electrician
Have the unit repaired by deconta or
a workshop authorised by deconta.
Maintenance
51 from 62
Version 1