Table of Contents
Advertisement
6
Transport
This section contains information on transporting the machine outside and inside the
factory.
Transport is the change of location of the machine by manual or technical means.
6.1
Loss of warranty claims
The manufacturer's warranty is void in the following cases:
•
In the event of modifications to the machine that have not been agreed with the
manufacturer
•
If the transport is not carried out properly
6.2
Off-site Transport
6.2.1
Transport space
Off-site transport takes place in the public space. In this case, the machine is transported
from one place of use to another.
6.2.2
Legislation
Off-site transport of the machine shall be in accordance with the legislation of the country
in which the machine is transported off-site.
6.2.3
Qualification of the staff
Persons transporting the machine outside the company must meet the following
requirements:
Person
Freight forwarder
Logistician
6.2.4
Warning of residual risks
Negative pressure unit green dec G 600, G 700
Original operating instructions
Required qualification
Completed training in transport and experience in off-site
transport of machinery
Completed training and experience in the internal transport
of machines
Wear safety shoes. Loads can fall or be set down inaccurately. Serious
injuries to the feet and toes are possible.
Use head protection. Suspended loads can swing. Inattention can cause
the head to bump.
Use gloves. For transport, the unit must be attached to hoists or
transported by a forklift truck. Hands can be crushed or scraped during
these operations.
Transport
24 from 62
Version 1
Advertisement
Table of Contents
