Power Supply Connection - Ferroli TOR Instruction For Installation And Maintenance

TOR

4.7 POWER SUPPLY CONNECTION

When connecting the power cable, choose the correct type of wiring according to the type of power supply
Insert the power cable through the nylon connector located in the base of the boiler. Loosen the nut of the connector and
tighten it again after inserting the power cable.
For models 6-9-12-18-24 KW For models 6-9 KW
L1 L2 L3 N N L1 L2 L3 N N
L1 L2 L3 N PE L N PE
fig. 17 - Three-phase wiring fig. 18 - Single-phase wiring
EN
28
cod. 3542B750 - Rev 09 - 02/2024