Remote Control Settings - Yamaha 01X Software Installation Manual

When using VST instruments (plug-in software synthesiz-
ers)
The settings of the plug-in software synthesizer are saved separately for
each song. This means that when you open a song, all settings which have
been already stored to the song are automatically called up.
This section explains how to set a VST plug-in software synthesizer when
creating a new song.
1
In the toolbar, click [ ] (Soft Synth rack) to open the Soft Synth rack.
2
Click the [ ] (Add) button and select the plug-in synthesizer to be used
from the pop up menu that appears.
• In the pop up menu called up here when clicking [Add], the plug-in synthesizers
located in Program Files Yamaha
on using these plug-ins with other programs, refer to "Settings for VST Plug-ins"
(page 26).

Remote Control Settings

1
From the Setup menu in the Track View window, select "Remote Control"
to call up the dialog boxes below, then make the settings as shown.
Mode: 01X
Input device: mLAN MIDI In (Port 1)
Output device: mLAN MIDI Out (Port 1)
01X port number: 1
• The port not indicated with a number is Port 1.
• When using the Multi Part Editor for remote control as the plug-in of SQ01, select
"Multi Part Editor for MOTIF-RACK" as the MIDI Editor.
• The MIDI Mixer in the SQ01 cannot be remote controlled by the 01X.
• [Setup] of Audio Mixer window – setting of the [Remote Control...] becomes
invalid.
2
On the 01X, select UTILITY
then select "GENERAL."
Vstplugins, is displayed. For information
REMOTE (knob 1) REMOTE SELECT,
Audio setup
1
Make sure that the "Disable Audio" setting is not checked. (Select
"Audio" from the Setup menu, then click it if necessary to turn the check-
mark off.) If this is checked, the audio cannot be used.
2
From the Setup menu, select [Audio]
below.
3
Select ASIO for the audio driver and "ASIO mLAN" for the device.
4
Enable (checkmark) the appropriate channels that will be used for the
inputs/outputs of the active channels.
5
Click [OK] to close the window.
TOOLS for 01X/Plug-in Effect Installation Guide
[Device] to call up the window
25