Studio Manager For 02R96; Card Filer (Dm2000 Only); Setting Up Oms - Yamaha 02R96 Installation Manual

14
Chapter 3—Macintosh Installation

Studio Manager for 02R96

1 Start your Macintosh, and insert the included CD-ROM into your computer's
CD-ROM drive.
Double-click the "SM_" folder on the CD-ROM.
2
Double-click the "02R96" folder.
3
4 Double-click "Install Studio Manager."
Follow the on-screen instructions to install the software.
5

Card Filer (DM2000 only)

Start your Macintosh, and insert the included CD-ROM into your computer's
1
CD-ROM drive.
Double-click the "Card_" folder on the CD-ROM.
2
3 Double-click "Install Card Filer."
Follow the on-screen instructions to install the software.
4
See the "CardFilerManual.pdf," which is installed in the same folder as Card Filer, for infor-
mation on using Card Filer.

Setting up OMS

The "OMS Setup for YAMAHA" folder on the included CD-ROM contains OMS studio
setup files for use with the DM2000 and 02R96.
Turn off the DM2000/02R96 and use a USB cable to connect the USB TO
1
HOST port on the DM2000/02R96 to a USB port on your computer.
If you are connecting to the SERIAL TO HOST port, use a serial cable to connect the Printer
or Modem port on your computer.
Turn on the DM2000/02R96.
2
Start your Macintosh, and insert the included CD-ROM into your computer's
3
CD-ROM drive.
4 Open the "OMS_" folder on the CD-ROM, and then open the "OMS Setup
for YAMAHA" folder.
This folder contains six OMS studio setup files.
• DM2000-USB
• DM2000-Modem
• DM2000-Printer
• 02R96-USB
• 02R96-Modem
• 02R96-Printer
Copy the required file to your computer's hard disk, and then double-click it.
5
Studio Manager for DM2000/02R96—Installation Guide