Installing Studio Manager - Yamaha PM5D Installation Manual

Windows 2000
1
Start your computer to launch Windows, then log
in as Administrator.
2
Insert the included CD-ROM into your computer's
CD-ROM drive.
3
Go to My Computer–>Control Panel–>System–
>Hardware–>Driver Signing–>File Signature
Verification, select "Ignore—Install all files,
regardless of file signature," and then click [OK].
4
Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
5
Turn on your Yamaha mixing console.
The "Found New Hardware Wizard" appears.
6
Click [Next].
7
Select "Search for a suitable driver for my device
(Recommended)," and then click [Next].
8
In the subsequent window, select "CD-ROM
drives" only, and then click [Next].
NOTE: You may be prompted to insert your Windows
CD-ROM. Do not insert it! Click [OK], and in the "Copy files
from" section of the subsequent dialog box, enter
"D:\USBdrv2k_" (replacing "D" with the drive letter of your
CD-ROM drive), and then click [OK].
The driver is installed, and the message "Completing the
Found New Hardware Wizard" appears.
9
Click [Finish], and then restart your computer.
Windows XP
1
2
3
4
5
6
7
8
9
10

Installing Studio Manager

1
2
3
4
Studio Manager V2 Installation Guide (for PM5D)
Start your computer to launch Windows, then log
in as Administrator.
Insert the included CD-ROM into your computer's
CD-ROM drive.
Click the [Start] button, and then click [Control
Panel].
The following window appears.
Click [Switch to Classic display] in the left column
in the window to display all items in the Control
Panel.
Go to System Hardware–>Driver signatures–
>Driver signature options, select "Ignore—Install
software without asking for confirmation," and
then click [OK].
Click [OK] to close the "System Properties"
window, and then click the Close button to close
the "Control Panel" window.
Turn off your Yamaha mixing console, and then
use a USB cable to connect its USB TO HOST port
to a USB port on your computer.
Turn on your Yamaha mixing console.
The "Found New Hardware Wizard" appears.
Select "Install software automatically
(recommended) (I)," and then click [Next].
The driver is installed, and the message "Completing the
Found New Hardware Wizard" appears.
Click [Finish], and then restart your computer.
Double-click the "SM_" folder on the CD-ROM.
Double-click the "PM5D_" folder.
Double-click "Setup.exe."
Follow the on-screen instructions to install the
software.
5