Yamaha 02R96 Installation Manual page 11

8
Chapter 2—Windows Installation
Windows Me
Start your computer and Windows, and insert the included CD-ROM into
1
your computer's CD-ROM drive.
Turn off the DM2000/02R96 and use a USB cable to connect the USB TO
2
HOST port on the DM2000/02R96 to a USB port on your computer.
3 Turn on the DM2000/02R96.
The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and recon-
necting the USB cable. Alternatively, open the Add New Hardware control panel.
4 Select "Automatic search for a better driver (Recommended)," and then click
Next.
Windows Me should be able to locate the driver automatically, in which case you can pro-
ceed to Step 5. If the driver cannot be located, select "Specify the location of the driver
(Advanced)," click Next, specify your CD-ROM drive (e.g., D:\USBdrv_), and then con-
tinue as prompted.
The following window appears when the installation is complete.
5 Click Finish, and then restart your computer.
Studio Manager for DM2000/02R96—Installation Guide