Yamaha 02R96 Installation Manual page 9

6
Chapter 2—Windows Installation
Windows 98 & 98SE
Start your computer and Windows, and insert the included CD-ROM into
1
your computer's CD-ROM drive.
Turn off the DM2000/02R96 and use a USB cable to connect the USB TO
2
HOST port on the DM2000/02R96 to a USB port on your computer.
3 Turn on the DM2000/02R96.
The Add New Hardware Wizard appears. If it doesn't appear, try disconnecting and recon-
necting the USB cable. Alternatively, open the Add New Hardware control panel.
4 Click Next.
The following window appears.
Select "Search for the best driver for your device (Recommended)," and then
5
click Next.
Studio Manager for DM2000/02R96—Installation Guide