Table of Contents
Advertisement
Copying Files to PROMs
You can use the two files created with the following FORMAT operation to program two
ROMs, which you can then install in parallel to provide 16-bit wide address data words to a
16-bit microprocessor. This is done using the CO Y FILE TO ROM command.
PPS>COPY A:\LOWER.BYT TO PROM
CHECKSUtl = AS1B
PPS>COPY A:\UPPER.BYT TO PROM
CHECKSUM = AMAC
PPS>
Comments
You must install a blank
ROM in the personality module before entering each CO Y
command.
4-8
Example Programming Session
Advertisement
Table of Contents
