Table of Contents
Advertisement
TEMPO RECORDING
METHOD 3 — STEP
RECORDING
This method will only work if the currently selected bank contains no previous-
ly-recorded data.
1.
Press the EDIT key to enter the EDIT mode.
Press the START key. The "Recording:(7168)" display will appear on the LCD,
the TIME CODE display will go out and the MIDI TEMPO display will go out.
Enter the starting tempo via the 10-key pad. The TEMPO
figure may also be
incremented or decremented using the YES> and «NO keys.
Press the ENTER key once for each beat you wish to record at the previously
entered tempo. The MIDI MEASURE and BEAT displays will advance according
to the programmed
time signature (see "SETTING
THE TIME SIGNATURE,"
on page 13). As each beat is recorded, the remaining memory display to the
right of the LCD is decremented
by one. Recording is stopped automatically
when the memory display reaches 0000. A new tempo value can be entered
on any beat.
When
the required number of beats and tempo changes have been entered,
press the STOP
key to exit the step recording mode and return to the EDIT
mode.
Recording:
(7168)
(Remaining memory)
Enter starting tempo
N
ENTER
ノ
Press for each beat
STOP
19
Advertisement
Table of Contents
