Table of Contents
Advertisement
Event Replace
1.
In the ME EDIT mode (press the EDIT key), use the YES»
and «NO keys ог
the STEP
CUE function to locate the step at which new data is to be pro-
grammed.
2.
Pressthe EDIT-REPLACE (TIME CUE) key. The MIDI COMMAND, CHANNEL
and DATA displays will go out. The "Set commd:(1793)" display
will appear
on the LCD.
3.
Select the desired MIDI event command type using the YES and NO keys. A
J on the MIDI COMMAND
LED display defines a program change command,
while
a C defines a control change command.
4.
Press ENTER and the "Set chanl:" display will appear on the LCD.
5.
Enter the number of the MIDI channel on which the command for the current
step is to be transmitted
(1 through 16) via the 10- key pad or by using the
YES» and «NO keys. A setting of "00" inhibits transmission of the command.
6.
Press ENTER and the "Set data1:" display will appear on the LCD.
7.
Enter the value of the first data byte of the command
via the 10-key pad or
by using the YES» and «NO keys.
8.
Press ENTER and, if a control change command was selected, the "Set data2:"
display will appear on the LCD. If a program change command
was selected
the MSS1
returns to the ME EDIT mode.
9.
Enter the value of the second data byte of the command
via the 10-key pad
or by using the YES» and «NO keys.
10. Press ENTER to return to the ME EDIT mode.
ө Press the STOP key to exit and cancel at any stage before the last step is per-
formed.
ME EDIT MODE
Locate step
Set
data
1:
(1793)
Enter 1st data byte value
-
Set
commd:
(1793)
Select MIDI event command type
NO
CONTROL CHANGE
— —
Back to ME EDIT mode
COMMAND SELECTED
YES
Set
chanl:
(1793)
Enter channel no.
Enter 2nd data byte value
35
Advertisement
Table of Contents
