Table of Contents
Advertisement
POWER SOCKET:
Ground
Socket for connection of A.C. mains
supply. For connection see Fig.2.6.
AC Supply
17101(
Fig.2.6. A. C. Power Socket
2.3. SIDE PANELS
18
A drive shaft socket is situated on each
side of the 201 0. The socket on the left
of the instrument (when facing the
2010 front panel), is intended to receive
one end of the drive shaft UB 0041
when the scanning mechanism of the
201 0 is mechanically driven by one of
the B & K Level Recorders Types 2305
or 2307.
Driving the 2010 in this way will sweep
the frequency scale pointer clockwise.
(i.e. in the direction of increasing fre-
quency).
The socket on the right panel, is mainly
intended as an auxiliary drive source
when the 2010 is already being mechan-
ically driven. However, this socket may
be used for driving the 2010, should a
decreasing frequency sweep be required.
In this case, the left panel socket be-
comes an auxiliary drive source.
Advertisement
Table of Contents
