B & T Programmes - BRUEL & KJAER 2010 Instructions And Applications

Heterodyne analyzer

Hide thumbs Also See for 2010:

Table of Contents

4.6.2. 8 & T Programmes

Remote control of a B & T programme is only possible when the fre-

quency control voltage itself is provided by an external voltage. In this case,

the procedure is as follows:

1. The frequency is controlled according to section 4.6. 1.

2. Position the frequency scale pointer in the passive zone.

3. Choose a suitable programme using the three selectors B & T PRO-

GRAM, SELECTIVITY CONTROL, and EFFECTIVE AVERAGING

TIME. See Tables 5.1 to 5.4.

4. Using the B & T Remote Control socket (EXT. B & T PROGRAM) on

the rear panel, ground the pin appropriate to the desired range. See

Section 5.3.5.

Table of Contents