Kenwood L-07D Instruction Manual page 9

TONEARM ADJUSTMENTS
ADJUSTMENT OF STYLUS PRESSURE
1 Confirm that all the switches are turned OFF.
Place a record on the platter.
2. When readjusting the tonearm height after
replacing the cartridge, confirm that the
tonearm is not locked. For lock lever opera-
tion, refer to item 4
3. Adjust the tonearm height adjustment lever
so that the tonearm is parailel to the platter
when the stylus tip is on the record
NOTE:
One rotation of the tonearm height adjustment
fever will lower/raise the tonearm by approx.
0.1 mm.
Turning it counterclockwise
(DOWN) lowers the tonearm
NOTE:
1.
ADJUSTMENT OF OVERHANG
Qverhang line
{circle on 45 rpm adaptor)
™~.
ee
ae,
= ee
~
[18 mm (ort )
Locus of the stylus tip
Fig. 15
J
L-O7DIKI 9