Kenwood L-07D Instruction Manual page 13

(—
This turntable is equipped with both elec-
tronic and mechanical brakes When the
power switch is turned ON and the operation
switch is turned OFF (platter is stopped), the
mechanical brake is ON. At this time, rotating
the platter will activate the mechanical brake.
Turning the platter with too much force will
damage the mechanical brake
Do not operate the phonomotor until the plat-
ter is fixed to it. If the motor is operated
without a load, it will be damaged.
Confirm that all the power switches are OFF
before placing or removing the platter, or the
mechanical brake mechanism will be damag-
ed,
When the power is turned OFF during platter
rotation, both the mechanical and electrical
brakes are not activated and it takes a long
time to stop the piatter.
The specification of this turntable is
guaranteed only when the attached turntable
sheet or optional ceramic turntable sheet
{TS-10) is used
Replacing the turntable sheet with a conven-
tional rubber turntable sheet will degrade the
specified performance and the quartz lock will
not function
NOTE:
Fig. 24
x
ye
L-07DIK)
gy
13