Kenwood P-100 Instruction Manual

Kenwood P-100 Instruction Manual

Kenwood p-100: user guide
Hide thumbs Also See for P-100:

Advertisement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the P-100 and is the answer not in the manual?

Questions and answers

Miguel
January 25, 2025

Cómo se desconecta el giradiscos después de retirar el disco y el plato sigue girando.

1 comments:
Mr. Anderson
May 14, 2025

To disconnect the Kenwood P-100 turntable after removing the record while the platter keeps spinning, follow these steps:

1. Turn Off the Power: Locate the power switch on the turntable. Slide or press the switch to the "Off" position to stop the platter from spinning.

2. Unplug the Turntable: Once the platter has stopped, unplug the power cord from the electrical outlet to fully disconnect the turntable from power.

3. Disconnect Audio Cables: If needed, unplug the RCA cables and ground wire (if present) from your amplifier or receiver.

4. Secure the Tonearm: Lock the tonearm in its rest position using the tonearm clip to prevent movement or damage.

If the platter continues to spin after turning off the power, there may be a mechanical or electrical issue, such as a stuck power switch or faulty motor control. In that case, unplug the unit immediately and have it inspected by a technician.

This answer is automatically generated

Subscribe to Our Youtube Channel

Table of Contents

Save PDF