Huawei SUN2000-50KTL-M0 User Manual page 57

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
1. Select appropriate rubber fittings based on the outer diameter of the AC power
2. There are two types of waterproof connectors for the AC OUTPUT port. The
3. To avoid damaging the rubber fitting, do not route a cable with a crimped OT
4. Adjusting a cable when the thread-lock sealing nut is tightened will shift the
Figure 5-8 Routing a cable
Step 3 Remove an appropriate length of the jacket and insulation layer from the AC
output power cable using a wire stripper.
Ensure that the jacket is in the maintenance compartment.
Figure 5-9 Three-core cable (excluding the ground cable)
(A) Core wire
Issue 08 (2024-02-02)
NO TICE
cable to ensure proper sealing.
dimensions depend on the SUN2000 that is used.
terminal directly through the rubber fitting.
rubber fitting, which will affect the Ingress Protection Rating of the device.
NO TICE
Copyright © Huawei Technologies Co., Ltd.
(B) Insulation layer
5 Electrical Connections
(C) Jacket
49