Huawei SUN2000-50KTL-M0 User Manual page 115

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Item
Rated input voltage
Number of inputs
Number of MPP trackers
Note a: The maximum input voltage is the upper threshold of the DC voltage. If
the input voltage exceeds the threshold, the solar inverter may be damaged.
Note b: If the input voltage is beyond the operating voltage range, the solar
inverter cannot work properly.
Note c: PV strings connecting to the same MPPT must contain the same
quantity and model of PV modules. It is recommended that the PV string
voltage be higher than the lower threshold of the full-load MPPT voltage.
Output
Item
Rated active power
Maximum apparent
power
Maximum active power
(cosφ = 1)
Rated output voltage
Rated output current
Adapted grid frequency
Maximum output current
Power factor
Maximum total harmonic
distortion (rated power)
Note a: The rated output voltage of the SUN2000-50KTL-M0 is determined by
Grid code, which can be set on the SUN2000 app, SmartLogger, or NetEco.
Note b: Choose whether to connect the neutral wire to the SUN2000-50KTL-M0
based on the application scenario. When it is used in the scenarios without
neutral wires, set Output mode to Three-phase, three-wire. When it is used in
the scenarios with neutral wires, set Output mode to Three-phase, four-wire.
Issue 08 (2024-02-02)
SUN2000-70KTL-INM0
SUN2000-70KTL-INM0
288 V/500 V, 3W+PE
a
Copyright © Huawei Technologies Co., Ltd.
10 Technical Specifications
SUN2000-50KTL-M0
750 V 600 V@380 V/400 V, 620
V@415 V
12
6
SUN2000-50KTL-M0
65 kW
72 kVA
72 kW
220V/380V, 230V/400V,
240V/415V, 3W+(N
75.1 A
A@400 V, 69.6 A@415 V
50 Hz 50 Hz/60 Hz
83.2 A
A@400 V, 76.6 A@415 V
0.8 leading... 0.8 lagging
< 3%
50 kW
55 kVA
55kW
b
)+PE
76 A@380 V, 72.2
83.6 A@380 V, 79.4
107