Huawei SUN2000-50KTL-M0 User Manual page 101

SUN2000-(50KTL-M0, 70KTL-INM0)
User Manual (India Edition)
Figure 7-5 Grid parameters (special user)
----End
Parameter List
Parameter
Grid code
Isolation settings
Output mode
PQ mode
Auto start upon grid
recovery
Grid connected
recovery time from
grid faults (s)
Issue 08 (2024-02-02)
NO TE
Vn represents the rated voltage and Fn represents the rated frequency.
Description
Set this parameter based on the grid code of
the country or region where the SUN2000 is
used and the SUN2000 application scenario.
Set the working mode of the inverter based
on the grounding status at DC side and the
connection to the power grid.
Indicates whether the SUN2000 output has a
neutral wire.
If this parameter is set to PQ mode 1, the
maximum active power equals the maximum
apparent power. If it is set to PQ mode 2, the
maximum active power equals the rated
active power.
Specifies whether to allow the SUN2000 to
automatically start after the power grid
recovers.
Specifies the waiting time for SUN2000
restart after the power grid recovers.
Copyright © Huawei Technologies Co., Ltd.
7 Man-Machine Interactions
Remarks
N/A
N/A
Supported by the
SUN2000-50KTL-M0 only.
Supported by the
SUN2000-50KTL-M0 only.
N/A
N/A
93