Table of Contents
Advertisement
17.2 Changing the basic set-
tings
To call up the basic settings, press
1.
and hold + Options for approx. 3
seconds.
The display shows
a
Select the required basic setting.
2.
→ "Overview of the basic settings",
Page 40
Adjust the basic setting:
3.
To change the value, press
‒
.
To reset the appliance to the
‒
factory settings, press and hold
for approx. 3 seconds.
To save the changes, switch off
4.
the appliance.
Cleaning and servicing
18 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
18.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the
Cottons90°C pro-
▶
gramme without laundry and with a
cleaning agent for caring for the in-
.
or
Cleaning and servicing en
side of the appliance
→ "Accessories", Page 31 or with
washing powder that contains
bleach.
18.2 Cleaning the detergent
drawer
If you want to replace the liquid de-
tergent or fabric softener in the dis-
penser with another product or if the
detergent drawer is dirty, clean the
detergent dispenser.
ATTENTION!
The pump unit contains electrical
components. Electrical components
may be damaged if they come into
contact with liquids.
Do not clean the pump unit in the
▶
dishwasher and do not immerse it
in water.
Protect the electrical connection
▶
on the rear against water, deter-
gent and fabric softener residue.
Put the appliance into standby
1.
mode.
→ "Put the appliance into standby
mode", Page 34
Pull out the detergent drawer.
2.
Press down on the insert and re-
3.
move the detergent drawer.
41
Advertisement
Table of Contents
