Table of Contents
Advertisement
en Cleaning and servicing
15.2 Changing the basic set-
tings
Set the programme selector to po-
1.
sition 1.
Press
Spin Speed and, at the
2.
same time, turn the programme
selector to position 2.
The display shows the current
a
value.
Set the programme selector to the
3.
required position.
→ "Overview of the basic settings",
Page 33
To change the value, press
4.
ish in/Time Dry.
To save the changes, switch off
5.
the appliance.
34
Cleaning and servicing
16 Cleaning and servi-
cing
To keep your appliance working effi-
Cleaning and servicing
ciently for a long time, it is important
to clean and maintain it carefully.
16.1 Cleaning the drum
CAUTION
Risk of injury!
Permanently washing at low temper-
atures and a lack of ventilation for
the appliance may damage the drum
and cause injury.
Regularly run a programme for
▶
cleaning the drum or wash at tem-
peratures of at least 60 °C.
Leave the appliance to dry after
▶
every operation with the door
open, and leave the detergent
drawer to dry.
Run the
▶
gramme without laundry and with a
cleaning agent for caring for the in-
Fin-
side of the appliance
→ "Accessories", Page 29 or with
washing powder that contains
bleach.
16.2 Cleaning the detergent
Pull out the detergent drawer.
1.
Drum Clean pro-
drawer
Advertisement
Table of Contents
