Table of Contents
Advertisement
Activating remote start
Requirements
The appliance is connected to your
¡
home WiFi network.
The appliance is connected to the
¡
Home Connect app.
A programme is selected.
¡
The appliance door is closed.
¡
The detergent drawer has been
¡
pushed in.
Press Remote Start.
▶
lights up and the appliance is
a
enabled for remote start via the
Home Connect app.
Deactivating remote start
Press Remote Start.
▶
goes out.
a
16.8 Data protection
Please see the information on data
protection.
The first time your appliance is
registered on a home network
connected to the Internet, your
appliance will transmit the following
types of data to the Home Connect
server (initial registration):
Unique appliance identification
¡
(consisting of appliance codes as
well as the MAC address of the
Wi-Fi communication module in-
stalled).
Security certificate of the Wi-Fi
¡
communication module (to ensure
a secure data connection).
The current software and hardware
¡
version of your appliance.
Status of any previous reset to
¡
factory settings.
This initial registration prepares the
Home Connect functions for use and
is only required when you want to
use the Home Connect functions for
the first time.
Note: Please note that the
Home Connect functions can only be
utilised with the Home Connect app.
Information on data protection can be
retrieved in the Home Connect app.
Home Connect en
39
Advertisement
Table of Contents
