Firmware Update Using Wifi; Firmware Update Using A Usb Device - Husqvarna VIKING Designer RUBY 90 User Manual

Firmware Update Using WiFi

It is always recommended to install the latest firmware in
your machine.
To be able to get the latest firmware wirelessly you need to
connect to a network using WiFi. When connected, your
machine will automatically search for available firmware
update. If the machine has detected that there is a newer
firmware available, the firmware update button will be visible.
Touch the button to download and install the latest firmware.
When the update is completed the machine will restart
automatically. Check the firmware version number in settings,
machine information.

Firmware Update Using a USB Device

Visit the HUSQVARNA® VIKING® website at
www.husqvarnaviking.com and find your machine. Here you
will find the available updates.
1. Download the update firmware zip file. Unzip the file
and copy the file (.clo) to a USB device.
Note: Do not change the name of the file or do not copy the file into
an existing folder on the USB device.
Note: Make sure that there is no old firmware update file (.clo) on
the USB stick when copying the new firmware update file (.clo).
The file name is not unique.
2. Make sure that the machine is turned off. Connect the
USB device loaded with the new firmware version to a
USB port on your machine.
3. Press and hold the reverse button, located on the right
side of the sewing head, and turn on your machine with
the ON/OFF switch. Release the reverse button when an
update icon is shown on the screen.
4. The firmware update will be verified and installed. The
machine may restart several times during the update
process. Do not turn off the machine.
5. When the update is completed the machine will restart
automatically. Check the software version number in
settings, machine information.
Indication that your machine
does not have the latest
firmware. Touch the button to
open a pop-up to download
and install the latest firmware.
A spinning wheel will be
shown on the firmware update
button indicating that the
firmware is downloading.
An exclamation mark will be
shown on the firmware update
button to notify that there is a
downloaded firmware waiting
to be installed.
5 WiFi & mySewnet ™ Services 63