Welcome To Embroidery Stitch Out - Husqvarna VIKING Designer RUBY 90 User Manual

Welcome to Embroidery Stitch Out

Before you enter embroidery stitch out mode, a "welcome to
embroidery stitch out" window will appear. In this window
you will see an overview of your current embroidery settings.
Review your current embroidery settings to check that
everything is set as you desire.
Touch continue to proceed to embroidery stitch out. Touch
return to go back to embroidery edit.
Attached Needle Plate
The Straight Stitch Plate is generally recommended for best
results in embroidery. Your DESIGNER RUBY™ 90
machine senses which needle plate is attached. If the needle
plate shown is not the one you wish to use, attach your
preferred needle plate. Read about how to change to the
Straight Stitch Plate.
Selected Hoop
The currently selected hoop in embroidery edit is shown. If
you want to change the hoop, touch return to go back to
embroidery edit. There you can change the hoop in hoop
selection. When you attach a hoop, the machine will sense
which hoop is attached to confirm that the hoop attached is
the selected hoop in embroidery edit.
Color Options
Preset your embroidery with any of the three color options:
color block sort, color block merge or monochrome. You
can also set these options in embroidery stitch out. Read
more about color block sort, color block merge or
monochrome.
Note: You can set both color block sort and color block merge if desired.
Basting Options
Select basting to add a basting stitch that will secure your
fabric to your stabilizer. You can choose either baste around
design or baste around hoop or both. Basting can also be
activated in embroidery stitch out. Read more about basting
options.
Selected Foot Type
Select which embroidery foot type you will use for the
embroidery. The Sensor Q-Foot and deLuxe™ stitch system
are recommended for best embroidery results. Whichever
foot type you have selected in the temporary embroidery
settings is the foot that will be shown in this window. You
can change the foot type in the window and it will change the
selected embroidery foot type in the temporary embroidery
settings.
9 Embroidery Stitch Out 131