Husqvarna VIKING Designer RUBY 90 User Manual page 24

Stitch № Presser
foot
B
A25
A26 A
A27 B
A28 B
J
A29
A30 A
B
A31
B
A32
A33 A
A34 A
A35 A
A36 B
A37 A
A38 A
A39 A
A40 A
A41 A
A42 Sensor
Buttonhole
foot/C
24
Name
Elastic/casing stitch
Serpentine stitch
Elastic or smocking
stitch
Bridging stitch
Three-step zigzag
Two-step zigzag
Bartack stitch
Bartack, manual
Darning stitch (forward
and backward)
Darning stitch (side to
side)
Reinforced darning stitch Darn and mend work clothes, jeans, tablecloths and linen
Darning stitch (four-
step)
Belt loop stitch
Basting stitch
Straight basting stitch
Zigzag basting
Gathering stitch
Wide bartack buttonhole
1 Introduction
Description
For overlapped seams in tricot. To sew casing over narrow
elastic.
For mending and elastic applications.
Sew over two rows of elastic thread for elastic shirring.
For joining two pieces of fabric with finished edges and for
elastic shirring.
For overcasting, mending, sewing on patches and elastic.
Suitable for light and medium weight fabrics.
For joining two pieces of lace, and for elastic shirring.
Reinforce pockets, shirt openings, belt loops as well as at lower
end of a zipper.
Reinforce pockets, shirt openings, belt loops as well as at lower
end of a zipper.
Darn and mend small holes in work clothes, jeans, tablecloths
and linen towels. Stitch over hole, touch reverse for continuous
darning and auto stop.
For mending small tears.
towels. Stitch over hole, touch reverse for continuous darning
and auto stop.
A group of four stitches perfect for mending small tears. Stitch
#1 and #3 are sewn in a forward motion, stitch #2 and #4 are
sewn backwards. To change stitch and direction touch the
reverse button.
Tip: Press fusible interfacing on the wrong side before mending the tear.
For securing belt loops.
For temporary seams. The long stitches and reduced tension
make the seams easy to unravel.
To baste, press the foot control and the machine will make two
stitches, stop and raise the foot. When the presser foot lifts,
move the fabric to the next baste position and press the foot
control. Feed teeth lowered automatically.
To baste, press the foot control and the machine will make two
stitches, stop and raise the foot. When the presser foot lifts,
move the fabric to the next baste position and press the foot
control. Feed teeth lowered automatically.
No fix stitch in the beginning of the seam for easy gathering.
For medium and heavy fabrics with extra cutting space.