Table of Contents
Advertisement
en Before using for the first time
Wire rack
Insert the wire rack with the open
side facing the appliance door.
Tray
Slide the tray in with the sloping
E.g. univer-
edge
sal pan or
baking tray
3.
To place the accessory at shelf positions with pull-
out rails, pull out the pull-out rails.
Wire rack
Position the accessory such that it is
or baking
inserted on the rear stop
tray
pull-out system.
Note: The pull-out rails lock in place when they are
fully pulled out. Gently push the pull-out rails back
into the cooking compartment.
7 Before using for the first time
f i r s t t i m e
Be f o r e u s i n g f o r t h e
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7.1 Initial use
After connecting the appliance to the power supply,
you must configure the settings for its initial start-up. It
may take a few minutes for the settings to appear on
the display.
Notes
¡ You can adjust the settings at any time in the basic
settings.
→ "Basic settings", Page 15
¡ You can also use Home Connect to configure the
settings. When your appliance is connected, follow
the instructions in the app.
→ "Home Connect ", Page 16
Setting the language
Requirement: The appliance is connected to the power
supply.
10
towards the appliance door.
of the
4.
Push the accessory all the way in, making sure that
it does not touch the appliance door.
Note: Take any accessories that you will not be using
out of the cooking compartment while the appliance is
in operation.
Combining accessories
You can combine the wire rack with the universal pan
to catch any liquid that drips down.
1.
Place the wire rack on the universal pan so that
both spacers
are on the rear edge of the univer-
sal pan.
2.
Insert the universal pan between the two guide rods
for a shelf position. In so doing, the wire rack is on
top of the upper guide rod.
Wire rack
on univer-
sal pan
6.3 Other accessories
You can purchase other accessories from our after-
sales service, specialist retailers or online.
You will find a comprehensive range of products for
your appliance in our brochures and online:
www.neff-home.com
Accessories vary from one appliance to another. When
purchasing accessories, always quote the exact
product number (E no.) of your appliance.
You can find out which accessories are available for
your appliance in our online shop or from our after-
sales service.
1.
Press
to switch the appliance on.
2.
Use the or button to select the language.
3.
Press the required language.
4.
Press
to confirm the language.
Setting up Home Connect
Note: You can skip Home Connect set-up by pressing
"Later". Next, set the clock.
1.
Press "Connect" to set up Home Connect.
2.
Make all other settings for initial start-up in the
Home Connect app.
Setting the time
1.
Use or to select the hours.
2.
Press the minutes.
3.
Use or to select the minutes.
4.
Press
to confirm the time.
Setting the date
1.
Use or to select the year.
2.
Press the month.
Advertisement
Table of Contents
